Ceramic/Metal/Plastic Structured Packing

Ceramic structured packing:
1) High capacity, high separation efficiency, low pressure drop, large flexibility
2) Suitable for all tower diameters
3) Acid resistance: 99.9%
4) Alkali resistance: 92% 
5) Temperature: 0 - 1,300°C
6) Mesh hardness: ≥7.
7) This product is able to applied to the drying tower, absorbing tower, cooling
    tower, desulphurization towers, rectifying tower, washing tower and 
    regenerative tower in petrol-chemistry, chemical engineering, coal chemical 
    engineering, elaborate chemical engineering, fertilizer, sulphuric acid, smelting,
    electrical power and environmental protection industries 
8) Specification: Φ100 �C 7,500mm
9) We can also design and produce according to the clients' requirements 

Metal structured packing:
1) Sheet metal packing: sheet metal structured tower packing provides high 
    capacity, wettability and low pressure drop in a number of distillation, 
    absorption and liquid/liquid extraction applications including:
    a) Refinery columns (atmospheric and under vacuum)
    b) Petrochemical columns
    c) Natural gas glycol dehydration
    d) Wastewater treatment stripping columns
    e) Atmospheric pressure and high pressure columns
2) Woven structured packing: woven structured packing is excellent for applications
    that require a large number of theoretical stages, lower pressure drop and small
    overall packed bed heights. The KAITE packing is manufactured from specially 
    woven wire gauze that is pressed into smooth plates, uniformly perforated, 
    corrugated and stacked with corrugations in alternate directions. This construction
    promotes intimate gas/liquid contact 

Proved applications include:
1) Pharmaceuticals
2) Fine chemicals
3) Flavors and fragrances
4) Electronic chemicals

Plastic structured packing:
1) The KAITE 125.X, 125.Y, 250.X and 250.Y (further types on requests) are also 
    available in different kinds of thermoplastics 
2) Werkstoffe / materials: polypropylene (PP), postchlorated polyvinylchloride 
    (PVC-C), polyvinylide-nedifluoride (PVDF) 
3) The plastic versions of KAITE have proved operational record in various types
    of absorption and desorption columns 

Special features:
1) Large number of transfer units per meter, low HTU, depending on the systems 
2) Small pressure drop per meter packed height 
3) Most economical load range up to F factor 3Pa
4) Maximum operating temperatures: 
    a) About 110 for PP
    b) About 150 for PVDF 

Product applicants:
1) HCL absorbers
2) SO2 absorbers
3) Flue gas cleaning
4) Sea water deaerators

Gauze packing (KAITE plastic gauze packing, type BX): 
The plastic gauze packing has been used industrially with great success for many years. The special gauze structured provides a very good wettability, even in aqueous systems. The packing is used primarily for columns with low liquid loads.

Special features:
1) Large number of transfer units per meter, low HTU, depending on the systems 
2) Minimum pressure drop, typically 2 - 4mBar/m 
3) Minimum liquid load approx. 0.05m³/m²h
4) Self-wetting packing surface, even for aqueous solutions 
5) Operating temperatures up to 80°, depending on the chemical components 

Preferred applications:
1) Small liquid loads
2) Increasing performance of existing columns
3) Columns with small overall height

Product applicants:
1) Methanol absorbers
2) Isopropanol absorbers
3) Dimethylformamide absorbers
4) Formaldehyde absorbers

In the column the structured packing are put side by side, different levels are turned at 90°. The outer packing segments for a round column cross-section are precisely cut. In the case of PP-HT temperatures of approx. 100°C are allowed for long term operation.